Canon Printer Error Code 6000 – Canon printer error code 6000 is one of the most common errors that frequently occurs. It appears when users try to print documents on the device. The problem with paper jam is the main reason for this error.
In this post, we will briefly discuss one such Canon printer error. Just read this post thoroughly. We have listed some effective and tested solutions to fix the problem. But before that, you need to know the exact cause of this problem. So take a look below and find the right reason.
Possible causes for Canon printer error code 6000
Canon printer error code 6000 can be caused by many factors. We will discuss some possible reasons here:
Ink cartridge holder is stuck
Possible paper jam in Canon printer
Paper feed tray is not set correctly
Blockage of paper feed tray from inside or outside
Scratched line feed or sensor unit
Overload of multiple print commands
Problem with the printer driver
Foreign objects, dust obstructions, or small pieces of paper in the paper path
Best Ways to fix Canon printer error code 6000
There are so many hacks to fix error 6000. Follow these steps and you can find your solution to fix error 6000. So start reading:
Solution 1: Reset or restart your printer.
Resetting or restarting your printer may be able to help you fix error 6000. To do this, you need to follow the steps below:
First, unplug your printer from the power outlet.
Then, leave it in pause mode for a few seconds.
After that, plug the power cord into the power outlet and turn on the printer.
Now press and hold the on / off switch for some time.
Then press the stop button twice.
Repeat this procedure once more. Then release the power switch.
Now press the Stop button four times.
Finally, check whether the problem persists or not.
Solution 2: Remove paper jam
Open the door to access the paper stuck between the rollers.
Pull out the papers. If you are unable to remove stuck paper, go to step 3.
Locate Service Mode in the menu that appears.
Pull the paper out in service mode as the distance between the rollers increases.
Solution 3: Clean rollers and remove clogging
Turn on the printer and put it in service mode.
Open the doors of the printer and remove any obstructions in between.
Remove the rollers and clean them with cotton with 10% alcohol.
Replace the rollers and restart the printer.
Test print a document and see if it works now.
Solution 4: Update the device driver
You can fix this problem by updating the device driver. Therefore, you need to follow the instructions below:
First, click on the Start menu.
There, type “Device Manager” and open the Device Manager.
Now expand the “Network Adapters” category and select your device.
Right-click on the device icon.
Then click on the “Update Driver” option and select “Automatically check for updated driver software”.
Finally, confirm this by pressing the Ok button and wait for a moment.
After this process is complete, turn the device back on and check whether the problem is fixed or not.
Solution 5: Load a paper
If you want to get different copies at the same time, it will adversely affect the paper scanning. To fix this, follow the instructions:
Go to the printer window and select “Settings.”
Then click on the “Printer Properties” option.
Then select “Advanced.”
When the advanced printer properties window appears, click “Paper Size” to set the new custom size.
Solution 6: Verify that the printer is installed properly
It’s likely that there is an installation problem in the printer that is causing this glitch. Also, your printer may not be properly connected to your device. So, you should find out whether the printer is installed properly or not.
First, go to the “Start” button and click “Settings”.
Then select “Devices.”
Then go to the “Printers and Scanners” section to search for your printer.
If you can’t find the printer, click the “Add printer or scanner” option.
Then wait for a while.
Eventually, your system will recognize your printer. Also, check whether the printer is turned on or not. Make sure that your printer is properly connected.
In the above article, all the solutions for Canon printer error code 6000 are explained. If in doubt, you can add comments in the following section.