Epson Printer Error Code E-01 – Epson is the brand that has gained fame and a place in the market for its printers of exceptional quality. However, Epson printers are not free from technical defects. Some users of the Epson printer often have the error code E-01. The Epson printer error code E-01 is recognized in the Epson manual as a fatal error, which is a kind of significant problem. The error means that the printer cannot perform the self-test procedures. In this situation, when the user tries to turn on his printer, he starts checking all the frameworks and does not execute the instructed print job.
If you find yourself in the same situation, there is no need to worry. There are many solutions to fix this error. Here in this article, we will provide some of the simple solutions that can quickly fix the error. If you want to put an end to this error, you need to go through this article.
Know the causes of Epson printer error code E-01.
After a long period of time, the printer is not able to keep up with the appropriate quality of function. This error code indicates that the applications are not running properly. Using the printer unnecessarily can also affect productivity.
If you are facing E-01 error code frequently, you need to know the reasons behind this error before going to the solution parts. Take a look at the causes.
Sometimes, the position of the CD disk is no longer fixed. This leads to error E-01.
A problem inside the cable line can block the power supply. Thus, it can prevent the self-start system.
Sometimes a malfunction occurs in the transport lock of the printer. The difficulty of maintaining the lock in an appropriate manner increases the likelihood that this error E-01 will occur.
The printer’s drivers may be out of date, which affects the performance of the Epson printer
If you have CISS installed in the printer, this may prevent the carriage blocks from moving. As a result, this error may occur.
Epson error code E-01 can also occur when the internal segments lose their strength to function properly. This error code is difficult to fix and often forces you to search for the solution. Therefore, you need to follow the discussions in the next section to get information about the reliable fixes for this error code.
Tips and tricks to fix Epson error code E-01.
Follow the steps to check if this can fix the problem.
Check the power supply:
If error code E-01 is displayed, you need to disconnect the power supply first. To do this, unplug the printer’s power cord from the power supply. Then turn off the Epson printer for 3 to 5 minutes. Now turn it on. After that, you need to confirm that you have removed the transport cable.
When you turn on the printer, you need to check the initialization process for all printer units. Now you need to make sure that the power connection from the power source is stable and the cables are not pinched between each other. Pinched cables can cause major problems and affect productivity.
Working with CISS:
When working with the Epson printer’s CISS conditions, it is recommended to verify that the printer’s cartridge is moving properly. The scanner portion of the printer must be properly closed. An initialization routine will run and then perform the startup checks. The entire device becomes functional again. If the ink cartridges do not move from left to right while working with the CISS, this error may occur. Therefore, you must use genuine Epson ink cartridges.
Run the system in safe mode:
Safe mode is such a feature that allows the printer to restart with its basic operation. You need to try running your system in safe mode. Now check if the printer continues to display this error notification. If it does not, you need to check the Internet connection. If the printer is running in wireless mode and allows AirPrint, you need to check it thoroughly. Therefore, you must have a stable Internet connection to reduce the Epson printer error code E-01.
Disassembly of the printer:
Go to the loading section of the cartridge if it does not work. Try to move the carriage and check if paper is stuck in the progressive sensors. This may be a reason for the malfunction of the paper tray. Now open the entire part of your printer and clean the visible sensor and the paper feed sensors. Also, keep the encoder belt and the plate encoder free of dust.
Check the CD plate and the scanner part:
If the CD platter is in the eject state, make sure you can slide the CD tray switch to its storage location. Be careful not to touch any component of the printer other than the tray. Turn off your printer to make sure the paper is not stuck in the machine. You also need to make sure that the top scanner section of your Epson printer is properly closed.